CSS Series 210 Type A/B

Conveyor system interrupted in closing area  

gte – Conveyor System Shutter (CSS) T90/EI90 (EI120)* 

Baureihe 210 Typ A_B
Proofs of suitability* 
Z-6.6-2089 General Technical Approval of the German Institute for Structural Engineering / Deutsches Institut für Bautechnik (DIBt), Berlin (Germany). 
LPCB 735a Loss Prevention Certification Board, von BRE London (Great Britain Commonwealth) 
ETA-16/0852 European Technical Approval (Europe) 
TP 0620928 Сертификата пожарной безопасности (Russia) 

 

   
Application 
Fire protective separation of pneumatic conveyor systems (pipe/ channel)  
   
Clear wall opening 

W = 500 mm up to 1.500 mm

H = 500 mm up to 1.500 mm

Thickness of closing element  = 58 mm 

 

 

Measurement pipe/channel 
150 mm – 1.200 mm Ø* 
   
Closing direction ←    →   ↑   ↓ 
   
Kind of installation
Raised installation on walls or ceilings. 
   
Mounting on
Concrete, brickwork, gas concrete, prefabricated walls, cladded steel* 
     
Design
Type 210 A 210 B
operating type 
manually automatic
operating position systematically open 
open/closed
open manually operated 
motor driven
close manually operated automatic
alarm closing in the event of fire through mechanical closing device 
 
Operating Principles

During conveying operation of the conveyor system the closing element is driven next to the opening and is retained there by means of the hold-open device (magnetic clamp).The pipe or channel element arranged in the extension of the closing element connects the conveyor system. 

In the event of fire detection or at the end of the conveying operation the conveying pipe is separated, namely delayed in time (up to 120 sec.) with the closing operation of the CSS. The opening is sealed all-over, four-sided overlapping without remaining openings. 

In case of a motor-driven design all functions can be operated by remote control via control of the hold-open device, the local manual push button on the CSS or by means of the conveyor system control. 

 
Eqipment*

Basic equipment see  „Description of Conveyor system shutters 

 - Hold-open device for keeping the CSS open 

- Sensor for realizing the open position. 
- Terminal box as interface for control. 

 
Additional Equipment*

In the extension of the closing element a hole segment according to the measurements of the piping and channel system is integrated. 

 

*) Detailed definitions can be taken from the approvals (upon request) 

gte Brandschutz gte Brandschutz